Only 2 Left Q: What is backorder?

Remove contents from the Z1 Motorsports Z Rear Differential Bushing Removal Tool and verify that ALL necessary hardware is present. Procedure: 1. Assure the car’s engine is turned off and place transmission in Park position (or in Reverse gear if equipped with a manual transmission).

Apply Parking Brake. 2. Raise and support vehicle.

Also, they are not pictured, but when looking at the rear of the differential cover there will be a small sensor with a 12mm bolt on the driver and passenger side of the differential, remove these bolts and sensors and place the sensors up and out of the way.

Remove contents from the Z1 Motorsports Z / G35 Rear Differential Bushing Removal Tool and verify that ALL necessary hardware is present. Procedure: 1. Assure the car’s engine is turned off and place transmission in Park position (or in Reverse gear if equipped with a manual transmission). Apply Parking Brake. 2. Raise and support Vehicle. Z1 Motorsports Rear Differential Bushing Removal Tool. Arguably the most annoying part failure that occurs on the Nissan Z, Z and Infiniti G35, G37 models is the rear differential bushings.

These bushings are used on the front mount ears as well as the rear subframe mount and secure the differential to the subframe assembly/5(24). Fits models: Z / Z / G35 / G37 Using Z1's Differential Bushing Removal Tool over time will wear out the threaded rod and associated hardware.

These may interest you.

This hardware consists of the exact parts you receive with the tool originally. You can choose to buy the larger rod, or small rod seperatly if Brand: Z1 Motorsports. May 03, It was actually the rear differential bushing, the trail of black doesn’t hit the floor it just stains under the bushing in the rear sub frame, the liquid filled bushing.

Was able to remove it with an air hammer, the 2 front bushing of the differential came out easier, the urethane bushing went in easy. The tool Z1 sells may make it easier to Estimated Reading Time: 3 mins.